MAX7219 Dot Matrix Module

MAX7219 Dot Matrix Module
Product Introduction:
The MAX7219 Dot Matrix Module is an electronic display module that integrates an LED dot matrix array, a MAX7219 display driver chip, and peripheral supporting circuits. The module is primarily employed for the visual output of numerical digits, alphanumeric characters, symbolic identifiers, low-complexity graphical elements, and scrolling text content. The module adopts a serial communication protocol for information interaction.
Send Inquiry
Description
Technical Parameters
 
Product Introduction
 

The MAX7219 Dot Matrix Module is an electronic display module that integrates an LED dot matrix array, a MAX7219 display driver chip, and peripheral supporting circuits. The module is primarily employed for the visual output of numerical digits, alphanumeric characters, symbolic identifiers, low-complexity graphical elements, and scrolling text content. The module adopts a serial communication protocol for information interaction.

 

 
Specifications
 

· Each module can drive a single 8×8 common-cathode dot-matrix display.

· Operating voltage: 5 V

· Dimensions: 12.8 cm (length) × 3.2 cm (width) × 1.3 cm (height)

· Features 64 mounting holes (for screws), with a hole diameter of 3 mm.

· Equipped with input and output interfaces, supporting the cascading of multiple modules.

 

 
Important Attributes
 

Type

Original Standard

Installation Method

Standard

Configuration

Original Standard

Model

MAX7219

Package/Enclosure

Original Standard

Describe

MAX7219 Lattice Module

Country Of Origin

China

Electric Current

Original Standard

Voltage - Isolation

Original Standard

Similar Attributes

Original Standard

SKU

HW-692

Weight

53g

Type

Standard

 

 
Wiring Instructions
 

· The input port is located on the left side of the module, and the output port is on the right side.

 

· When controlling a single module, simply connect its input port to the CPU.

 

· When multiple modules are cascaded, connect the input port of the first module to the CPU, the output port of the first module to the input port of the second module, the output port of the second module to the input port of the third module, and so on.

 

 
Packaging and Shipping Information
 

Packaging Details

Standard Packaging

Sales Entity

Individual Item

 

 
Taking the 51 microcontroller as an example:
 

VCC → 5V

GND → GND

DIN → P2.2

CS → P2.1

CLK → P2.0

 

 
FAQ
 

·Can the MAX7219 module be directly interfaced with an Arduino, ESP32, or Raspberry Pi?

In general, the module exhibits compatibility with the aforementioned development platforms, on the condition that logic-level adaptation is maintained.

·Does it support module cascading?

Yes, the MAX7219 facilitates cascading operation.

·Does the MAX7219 module support brightness adjustment?

Yes. The chip provides 16 discrete digital brightness levels, which are configurable via software control.

·What are the prevalent issues encountered with this module?

Typical faults include single-point LED illumination failure, garbled display output, luminance non-uniformity, cascading connectivity abnormalities, solder joint contact degradation, and power supply interference.

 

 

Hot Tags: max7219 dot matrix module, China max7219 dot matrix module manufacturers, suppliers, 2 5V Power Supply Module, 2 channel DC Motor Drive Module, 3 5 inch ESP32 Development Board, Constant voltage Step down Power Module, High level Solid state Relay, integrated circuit

Send Inquiry