SN75176A Differential Bus Transceiver Chip

SN75176A Differential Bus Transceiver Chip
Product Introduction:
The SN75176A Differential Bus Transceiver Chip is a monolithic integrated circuit designed for bidirectional data communication over multipoint bus transmission lines. This device is engineered for balanced transmission lines and complies with ANSI standards. Its driver can handle sink or source currents of up to 60 mA and features both positive and negative current limiting, as well as thermal shutdown, to protect against line faults; the thermal shutdown function is triggered at a junction temperature of approximately 150°C.
Send Inquiry
Description
Technical Parameters
 
Product Introduction
 

The SN75176A Differential Bus Transceiver Chip is a monolithic integrated circuit designed for bidirectional data communication over multipoint bus transmission lines. This device is engineered for balanced transmission lines and complies with ANSI standards. Its driver can handle sink or source currents of up to 60 mA and features both positive and negative current limiting, as well as thermal shutdown, to protect against line faults; the thermal shutdown function is triggered at a junction temperature of approximately 150°C. The SN75176A Differential Bus Transceiver Chip has a minimum input impedance of 12 kΩ, an input sensitivity of ±200 mV, and a typical input hysteresis of 50 mV. The SN75176A is suitable for use in transmission line applications alongside the SN75172 and SN75174 quad differential line drivers, as well as the SN75173 and SN75175 quad differential line receivers.

 

 
Parameters
 

Number of receivers

1

Number of transmitters

1

Duplex

Half

Signaling rate (max) (Mbps)

10

IEC 61000-4-2 contact (±V)

None

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

50000

Rating

Catalog

Operating temperature range (°C)

0 to 70

 

 
Product Features
 

Bidirectional transceiver

Three-state driver and receiver outputs

Separate driver and receiver enables

Meets or exceeds the requirements of ANSI standard TIA/EIA-422-B and ITU Recommendation V.11

Suitable for multipoint transmission over long-distance bus lines in noisy environments

Wide positive and negative input/output bus voltage range

±60 mA maximum driver output capability

Thermal shutdown protection

Positive and negative current limiting for the driver

12 kΩ minimum receiver input impedance

±200 mV receiver input sensitivity

50 mV typical receiver input hysteresis

Operates from a single 5V power supply

Low power consumption requirements

 

 

 
Core Functions
 

· Differential signal transmission

· Differential signal reception

· Half-duplex communication control

· Multi-node bus communication

· Three-state output control

· Noise-resistant bus transmission

· Overcurrent protection

· Thermal shutdown protection

 

 
Application Scenarios
 

· Industrial automation control

· RS-485 communication interfaces

· Intelligent instrumentation

· Embedded device development

 

 
Package/Pinout
 

SOIC (D)

8

PDIP (P)

8

 

 
FAQ
 

What type of chip is the SN75176A?

Yes.

What is the operating voltage of the SN75176A?

It operates from a single 5V power supply.

Does the SN75176A feature overcurrent protection?

Yes, it does.

 

 

Hot Tags: sn75176a differential bus transceiver chip, China sn75176a differential bus transceiver chip manufacturers, suppliers, 2 channel DC Motor Drive Module, 5V Photoresistor Relay, Constant voltage Step down Power Module, Digital DC Display, Negative Voltage Regulator IC, Serial Interface IC

Send Inquiry